Testing your swimming pool water and chemical explanation

 

Keep in mind that your water chemistry is influenced by a variety of things. These include rain, how much direct sunshine or shade the pool receives, animal exposure, wind, temperature, overhanging trees, how many swimmers enter at a time and how frequently, and so on. That being said, you'll discover that certain events should prompt you to evaluate your water chemistry and make adjustments as needed.

Poorly balanced pool water chemistry can put undue strain on your swimming pool and equipment. Not to mention that it may cause bathers' skin or eyes to itch. As a result, it is critical to maintain your water checked and balanced. Call one of the best swimming pool companies in Dubai!

 

Explanations of chemical

Normal salt level: 3200 to 3400 ppm 

·         Always use salt test strips to check the salt level.

·         Do not rely exclusively on the Salt Chlorinator to determine the amount of salt in your pool.

·         If the salt level is either low or too high, your salt chlorinator will not create enough chlorine to cleanse your pool.

·         If required, empty the pool a few centimeters at a moment and refill with fresh water to reduce the salt level. Test in between emptying to ensure that the salt level is not too low.

·         If you need to raise your salt level, use the salt chart that includes with the salt testing kits to determine how many sachets to add per gallon based on the current level. Brush around any salt that has settled on the floor to facilitate dissipation.

·         To achieve reliable results after putting salt (or any chemical), you must wait 24 hours before re-testing, as it takes time for the salt to circulate during the whole pool.

·         After adding any chemical, run the motor on high for just an hour to aid with this.

·         Do not use any old salt. Make use of granular pool salt.

·         Other varieties, like as pellets or pebbles, might cause your Salt Chlorinator to malfunction. Contact one of the swimming pool maintenance companies Dubai!

Normal chlorine levels are 1-3 ppm

Your Chlorine Generator generates chlorine for you via electrolysis inside the cell. That being stated, you do not have to manually add chlorine to your pool on a regular basis. If your Chlorine Generator is ever momentarily out of commission due to maintenance, etc., you will just have to add chlorine manually to receive a reading and maintain your pool disinfected.

There is no single setting that all Salt Chlorinators should be adjusted at in order to maintain an accurate/stable chlorine measurement. It may require a few changes before you discover the "sweet spot" for your specific setup. For example, if it's the midst of summer, very hot, the pool is in full daylight, and the pool is used almost every day, your Salt Chlorinator will most likely need to be set to a higher producing level to maintain up with the chlorine need.